DX51D GI/PPGL/PPGL COIL FACTORY
1.Pagtutukoy:
| Prepainted Steel Coil / Sheet | |
| Pamantayan | ISO,JIS,AS EN,ASTM |
| Grade | Q195 Q235 Q345 |
| SGCC SGCH SGC340 SGC400 SGC440 SGC490 SGC570 | |
| SGHC SGH340 SGH400 SGH440 SGH490 SGH540 | |
| DX51D DX52D DX53D DX54D DX55D DX56D DX57D | |
| S220GD S250GD S280GD S320GD S350GD S400GD S500GD S550GD | |
| SS230 SS250 SS275 | |
| Lapad | 600mm hanggang 1500mm |
| kapal | 0.125mm hanggang 4.0mm |
| Zinc coating | 40 hanggang 275GSM |
| Substrate | Cold rolled Substrate / Hot rolled Substrate |
| Kulay | Ral Color Systerm o ayon sa sample ng kulay ng mamimili |
| Paggamot sa ibabaw | Chromated at may langis, at ant-ifinger |
| Katigasan | Malambot, kalahating matigas at matigas na kalidad |
| Timbang ng coil | 3 tonelada hanggang 8 tonelada |
| Coil ID | 508mm o 610mm |
2.Magagamit na Sukat
| Pangalan | kapal | Lapad |
| Pre-painted Hot-dip Galvanized Steel Coil | 0.2~1.5mm | 600~1250mm |
| Pre-painted 5% Al-Zn Coated Steel Coil | 0.2~1.5mm | 600~1250mm |
| Pre-painted 55% Al-Zn Coated Steel Coil | 0.2~1.38mm | 600~1250mm |
| Uri ng Produkto | Pre-Painted Hot-Dip Galvanized Steel Coil (PPGI) | Pre-Painted Hop-Dip 5% Al-Zn Coated Steel Coil (PPGF) | Pre-Painted Hop-Dip 55% Al-Zn Coated Steel Coil (PPGL) | Pre-Painted Embossed Steel Coil |
| Mga Uri ng Patong | 1. Polyester (PE) 2. Silicone Modified Polyester (SMP) 3. Acrylic 4. Polyvinylidene Difluoride (PVDF) | PVC Plastisol | ||
| Mga pagtutukoy | CNS 10804 (2013) CNS 15298 (2013) CNS 15299 (2013) JIS G3312 (2013) CGCC CGCD1~3 CGC340 CGC400 CGC440 CGC490 CGC570 JIS G3318 (2013) CZACC CZACH CZACD1 CZAC340 CZAC400 CZAC440 CZAC490 CZAC570 JIS G3322 (2013) CGLCC CGLCD CGLC400 CGLC440 CGLC490 CGLC570 ASTM A755M (2016) AS 2728 (2013) EN 10169+A1 (2010) | JIS K6744 (2007) SG SA ASTM A755M (2016) EN 10169+A1 (2010) | ||
| Mga Uri ng Patong | Primer: PU o Epoxy 5μm Topcoat: 15-20μm Likod na Primer: PU o Epoxy 2μm Patong sa likod: PE o Epoxy 5-12μm | Primer: Epoxy Topcoat: PVC PLASTISOL 150- 250μm Likod na Primer: PU o Epoxy 2μm Patong sa likod: PVC PLASTISOL 100 - 250μm o Epoxy 7μm | ||
| Paggamot sa Ibabaw | Maaaring ilapat ang proteksiyon na pelikula Metal Embossed kahoy na sedro Estuko Balat | PVC Embossed Balat Lichee | ||
| Remarks | 1. Ang mga pamantayan ng ASTM na ipinakita dito ay gumagamit ng katumbas na sistema ng panukat.(Tatanggalin ng imperial system ang "M" pagkatapos ng kanilang numero ng detalye, gaya ng A755 at A792.) 2. Ang kapal ng patong ay para sa sanggunian lamang. | |||
Isulat ang iyong mensahe dito at ipadala ito sa amin
